MAIN

Navigation simulator

Navigation simulator NTPro 4000 manufactured by company "TRANSAS" includes a place for an instructor and 4 working places (bridge) for trainees.

The simulator allows to receive the information about the course, movement speed  of vessels-targets, simulate the conning of the vessel, procedures for mooring, search and rescue, radar plotting.

Main menu of operator's workplace

The simulator gives the following opportunities:

- control  all devices of ship's GMDSS radio station;

- simulation of a radio communication in  telephony, telex and DCC modes taking into account the distribution of radio waves;

- availability of electronic chart containing base of coastal stations and  identification of ship's current position;

- display of GMDSS sea areas, search and rescue areas, and also radiowaves distribution ranges;

- setting of external active woofers to keep listening watch on several channels;

- an opportunity of setting of TGS4000 console to real control panels VHF&DSC RT4822, MF/HF&DSC НС4500, Inmarsat-C Н2095С, Battery Panel ВР4680 (in a mode of simulation of  SAILOR System 4000 radio equipment).

Sea areas chart

Virtual bridge type

GMDSS training class-room is in addition supplied with NAVTEKS operating receivers, portable VHF radio station, COSPAS-SARSAT emergency radio beacon, radar responder.

[To return to the beginning]

Main ship's propulsion installation

Ship diesel propulsion installation simulator is produced in two variants:

- On the basis of 2-stroke slow-speed reversing main engine (prototype of MAN B&W 6S60MC, 12240 kW, 195 r.p.m.), controllable pitch screw;

- On the basis of 4-stroke middle non-reversing main engine (prototype of SEMT Pielstick 16 PC2.2V-400, 5966 kW, 520 r.p.m.), controllable pitch screw through reduction gear.

Ship's refrigerating plant

Ship's refrigerating plant simulator consists of the following systems:- fresh water cooling system is intended for cooling cylinders, cylinders covers, casing of gas-exhaust  part of the main engine (ME) and auxiliary engines (AE) turbo compressor.- The system is intended for cooling oil, fresh water and supercharging air of the main engine, air compressors, shaft bearings and other equipment. Seawater is pumped through the corresponding equipment and dumped over board. At low sea water temperature  (below 10 °С) it's partial re-circulation is used.

Ship's power plant

Ship's power plant simulator is intended for training of transport merchant watchkeeping engineer to obtain working skills and competent operation of  ship's power system, including:

-       preparation and putting into operation machinery and systems;

-       monitoring their operation according to changing parameters by means of signalling system;

-       detection and troubleshooting actions.

In addition to the practical skills training, the simulator allows to understand the main principles of operation and interrelation of ship's power systems elements better.

Auxiliary systems and machinery

Auxiliary systems and machinery simulator is a set of independent simulators, including a simulator of ship's distilling plant, called in general systems.

[To return to the beginning]

Mathematical model

Cargo ballast and technological operations on tankers LCHS-2000 simulator  manufactured by " TRANSAS " company includes a place for an instructor and 6 working places for trainees.

Simulators are unique means for preparation of personnel of tankers, capable to carry out the functions safely and effectively.

The simulator allows to study operations on:

- oil tankers;

- gas tankers of LPG type ;

- chemical tankers.

These simulators are manufactured in full conformity with IMO Model Courses and intended for:

- study the construction of a tanker,  it's supply with technical means and systems;

- training in systems and units control;

- study devices and operation of parameters monitoring system and signalling system;

- training in correct performance of technological operations in standard and emergency situations, including operations of calculation of stability and strength.

Graphic interface optimized for understanding of principles of all system operation and to obtain practical skills in trainees' operation with the equipment plays the great role.

Mathematical model of used vessel during the performance of stability and strength tasks, is used onboard of hundreds ships all over the world.

It is possible to choose various types of cargoes from an existing database of  simulator.

Oil tanker

Gas tanker

Chemical tanker

[To return to the beginning]